Vermilion 3D Faux Brick Wall Panel
3D Styrofoam Wall Panel - Pack of 2
- Regular price
-
$49.00 - Regular price
-
$61.00 - Sale price
-
$49.00
Premium 3D wall panels with 0.8" of architectural depth. Lightweight, DIY-friendly, and designed for any flat surface, indoors or out.
Not all adhesives hold the same
Adhesive details →Standard silicone has only moderate initial hold, so panels can slip while curing. High Tack MS Polymer grabs immediately — 350 kg/10 cm² — so panels stay put on vertical walls.
-
Hurry, only 4 items left in stock!
Product details
The Vermilion 3D Faux Brick Wall Panel brings the texture and warmth of classic red masonry to walls that wouldn't normally support it, without the heavy lifting or messy construction.
If paint feels flat and traditional wallpaper feels dated, this panel is a different category of wallcovering. It carries the rugged surface and authentic grout lines of a genuine brick wall, but the Vermilion variant is what sets it apart: rich, warm red and terracotta tones that read as timeless against rustic and traditional interiors.
It's made from high-density EPS (Expanded Polystyrene) styrofoam, which gives it a premium, tactile finish without the structural demand of stone or clay. Suitable for a cozy living room accent wall, a bedroom feature wall, a hallway, or a commercial interior. The look stays vibrant and classic in every setting.
At a Glance
- Authentic 3D Brick Surface: Deep texture and tonal variation modeled on classic red vermilion brickwork, not a printed pattern.
- Lightweight, Built to Last: High-density EPS construction holds detail crisply but stays light enough for one person to handle and position.
- Thermal & Acoustic Buffer: The dense foam adds a layer of insulation against room temperature swings and softens ambient noise, something flat wallpaper simply can't do.
- Tool-Light Installation: No drilling, no dust, no contractor. A bead of construction adhesive and steady pressure is all it takes on any smooth, flat wall.
- Real Brick Look, Fraction of the Cost: A full masonry feature wall without the labor, the structural load, or the budget that comes with it.
Dimensions & Coverage
Planning the right quantity is straightforward. Each panel measures 19.7" × 39.4" (50 × 100 cm) and gives you generous coverage per piece.
- Single Panel: covers approximately 5.38 sq. ft.
- Pack of 2: approximately 10.76 sq. ft. Suited for small backsplashes, accent columns, or sampling the texture before a larger order.
- Pack of 9: approximately 48.4 sq. ft. The right choice for full accent walls, larger living spaces, and retail interiors.
Product Details
- Variant: Vermilion (Classic Warm Red Brick)
- Material: EPS (Expanded Polystyrene) Styrofoam
- Panel Dimensions: 19.7" × 39.4"
- Pack Options: 2 panels / 9 panels
- Installation: Glue-on (adhesive sold separately)
- Best For: Living rooms, bedrooms, hallways, home offices, and retail spaces.
Measure the wall, pick the pack size that fits the area, and start your Vermilion brick install when you're ready.
Shipping Info
Delivery generally takes 3-5 business days. Free shipping to the US.
Installation Guide
Step 1: Clean and dry your wall surface.
Step 2: Apply construction adhesive to the back of each panel.
Step 3: Press firmly onto the wall and hold for 30 seconds.
Trim panels with a utility knife at edges. Optional: fix with screws for extra hold. Paint with any standard wall paint for a custom finish.
How Many Panels Do You Need?
Enter your wall dimensions and we'll calculate the rest.
How to Install
Watch the quick install video and follow the steps below.
1
Measure & cut
Mark your panel with a pencil and score it with a sharp utility knife. The lightweight foam core snaps cleanly along the line, no power tools required for the process.
2
Apply adhesive
Apply 15 uniform dots of construction adhesive across the back of the panel: place 12 dots spaced evenly along the perimeter and 3 dots evenly down the center line.
3
Press to the wall
Position the panel against any clean, flat surface and press firmly for ten seconds. Continue panel by panel, done in an afternoon, no professional install needed.
Common Questions About This Product
How do I install these panels?
Apply a high-quality, solvent-free construction adhesive to the back of each panel and press it firmly onto a clean, dry wall. You can cut them to size easily with a standard utility knife. Most DIY projects can be completed by one person in just a few hours.
Can I paint the panels?
Yes! Our panels easily accept any standard water-based (acrylic or latex) interior wall paint. Using a roller, brush, or spray paint is highly effective and lets you customize the stone or brick look to match your exact styling.
Are the panels moisture resistant?
Yes. Our high-density polystyrene panels are entirely water-resistant and moisture-resistant, making them ideal for kitchens, bathrooms, basements, and high-humidity environments. They will not warp, rot, or grow mold.
How do I replace a damaged panel?
Simply use a utility knife to carefully cut out the damaged section and scrape off the old adhesive. Wipe the wall clean, apply fresh construction adhesive to a replacement piece cut to size, and press it into place. Touch-up paint or caulk can be used to make the seam seamless.
How long does shipping take?
Delivery of your realistic panels takes 3 to 7 business days with standard transit to your door. We offer free shipping to the contiguous USA states only.
What is your return policy?
We offer a hassle-free 15-day return policy. If you have leftover panels or change your mind, simply contact our support team at service@snapmasons.com or Whatsapp and we will guide you step-by-step through the return process.